For the Food Industry, we manufacture belts for use in high or low temperatures, with excellent resistance to oils and fats and superb release characteristics.
To ensure food safety and to avoid any food contamination, a complete range of belts is available in compliance with:
Ammeraal Beltech developed belts with antimicrobial additives to assist in reducing the number of microbes on food contact surfaces. This also reduces the risk of food contamination - ensuring optimum adherence to your food safety standards and supports the implementation of your ISO 22000 requirements (previously HACCP).
Our AntiMicrobial (AM) belting range will help to keep the belt cleaner and reduce build-up of bacteria on the belt surface.
Stronger and tougher than ever.
Our non-fray belts run and remain intact longer and deliver even better food hygiene by reducing fabric fray contamination.
Our KleenEdge and AmSeal Belts tackle contamination risks that may occur from belt edge wear. The belt construction is designed in such a way that the high strength reinforcement fabric is held securely together in a tough non-cracking thermoplastic polyurethane seal.
Particularly when conveying small goods, the transfer between 2 belts must be as short as possible. In this case it is common to use knife-edges.
Knife-edges are used in material handling, primarily on conveyor belts for the Food Industry and for the Beverage Industry. More tension is needed to flex the belt over a knife-edge which causes more wear. This calls for premium quality belts.
We offer low noise belts for better working environments capable of high-speed power turns and extremely reliable flame-retardant* belts with extra long-wearing top covers.
Our high impact-resistant belts are able to withstand heavy shock loads.
Working closely with OEMs we have developed a range of self-tracking belts showing superior performance on fixed centre conveyors, two-way running conveyors and wide, short centre belts. Tracking of a belt in these situations is always very difficult.
Our high grip belts are specifically designed to increase the friction between the belt and the products being carried. This is often needed for inclined transport or in slippery conditions.
High grip characteristics can be obtained by using different materials and/or using certain profiles (embossing).
To give you an impression of the practically unlimited possibilities, a selection of popular profiles are shown here.
We offer a range of wear-resistant belts that are specifically designed to handle even the toughest conditions you can think of.
Wear-resistance is one of the most important properties that determine the life expectancy of a conveyor belt.
To ensure that belts run as efficiently as possible on conveyor systems, we present a series of belts that offer the potential of a considerable power consumption reduction.
Belt selection is a very important factor in saving energy, but not the only one.
Ammeraal Beltech’s ‘Energy Saving Concept’ is based on 3 pillars that influence the power demands of a conveyor:
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
|Article Code||Description||Belt thickness||Hardness top side||Info|
|internal AB method KV.002||according to ISO 868||Minimum pulley diameter|
|SBNO573360||Nonex EM 10/2 00+07 light blue FG AM||2.5 mm||65A Shore||40 mm|
|SBNO575700||Nonex EM 8/2 00+05 light blue AS FG AM||2 mm||65A Shore||25 mm|
|SBNO575703||Nonex EM 8/2 00+A18 light blue AS FG AM||2.4 mm||65A Shore||25 mm|
|SBNO576010||Nonex EF 10/2 A18+07 light blue FG AM||3.2 mm||65A Shore||50 mm|
|SBRY577980||Ropanyl EM 6/2 00+02 light blue AS FG AM||1.5 mm||85A Shore||6 mm|
|SBRY577981||Ropanyl EM 6/2 00+02 light blue M2 AS FG AM||1.5 mm||85A Shore||6 mm|
|SBRY577982||Ropanyl EM 6/2 00+A21 light blue AS FG AM||1.7 mm||85A Shore||6 mm|
|SBRY578121||Ropanyl EM 12/2 00+02 light blue M2 AS FG AM||1.6 mm||85A Shore||25 mm|
|SBRY578759||Ropanyl ESM 5/2 00+015 light blue M1 FG AM||1.3 mm||93A Shore||5 mm|
|SBRY579780||Ropanyl EM 3/1 00+02 light blue AS FG AM||0.8 mm||85A Shore||6 mm|
|SBRY579781||Ropanyl EM 3/1 00+02 light blue M2 AS FG AM||0.8 mm||85A Shore||6 mm|
|SBRY591240||Ropanyl ESM 6/1 F1+03 light blue FG AM NF||1.1 mm||85A Shore||6 mm|
|SBRY593951||Ropanyl ESM 10/2 00+02 light blue M2 FG AM NF||1.3 mm||93A Shore||8 mm|
|SBRY593980||Ropanyl ESM 10/2 00+02 light blue AS FG AM NF||1.3 mm||93A Shore||8 mm|
*Consult your local Ammeraal Beltech expert to determine the most appropriate belt type, colour and material combination for your specific requirements and local stock availability.